UNIVERGE SV8100 Issue 5.0
Virtual Extensions 1 - 1081
Operation
To answer a call ringing a Virtual Extension:
1. Press the flashing Virtual Extension key.
- OR -
Go off-hook.
. Program 20-10-08 needs to be set to on (1) for extension Class of Service.
To place a call to a Virtual Extension:
1. Go off-hook.
2. Dial the Virtual Extension, or press the Virtual Extension key.
. The operation depends on the setting in Program 15-02-21.
To place a call from a Virtual Extension:
1. Press the Virtual Extension key.
. The operation depends on the setting in Program 15-02-21.
2. Place an intercom call or dial a trunk access code to seize an outside line and place your call.
To program a Virtual Extension key on a telephone:
1. Press Speaker.
2. Dial 852.
3. Press the key you want to program.
4. Dial *03.
23-04-01 Ringing Line Preference for
Virtual Extensions
When an extension has a virtual
extension on Function Key, this
program determines the priority
(1~4) for a Ring Group for
automatically answering ringing
calls when the handset is lifted. If
(00) is selected for the Ring
Group, when the user lifts the
handset, the user can answer a
ringing call from any group.
00~64
(0 or 00=Don’t Care)
(default = 00)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
