UNIVERGE SV8100 Issue 5.0
Voice Over 1 - 1115
Operation
To initiate a Voice Over to a busy extension:
1. Press Voice Over key (Program 15-07 or SC 851: 48)
- OR -
Dial 890.
. You hear an alert tone and the Voice Over key flashes. You can talk to the called party after the alert tone ends.
. To use Service Code 890 for Voice Over, Program 11-16-09 (Voice Mail Service Code) must be undefined.
To respond to a Voice Over alert tone to your extension:
You can respond only if you have a Voice Over key.
1. Press the Voice Over key.
. The Voice Over key lights steadily (green) and you can talk to the interrupting party.
. You cannot respond by dialing the Voice Over Service Code (6).
To return to your original call:
1. Press the Voice Over key.
2. Press the Voice Over key again.
. Your Voice Over key flashes red when you are talking to your original call.
. To switch between your original call and the interrupting party, just keep pressing the Voice Over key.
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
Program how long an extension
must wait before using the Voice
Over feature can be used on a call
(this time expires before putting a
call in a talk state). This time also
affects Barge-In.
0~64800 (seconds)
(default = 5 seconds)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
