NEC Univerge SV8100 - Page 1169

UNIVERGE SV8100 Issue 5.0
Warning Tone for Long Conversation 1 - 1159
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward System Access (DISA)
Intercom
Long Conversation Cutoff
Single Line Telephones
Code Restriction
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
14-01-17 Basic Trunk Data Setup – Trunk
to Trunk Warning Tone for Long
Conversation Alarm
Determine whether DISA callers
should hear the Warning Tone for
Long Conversations (0 = Disable,
1 = Enable).
0 = Disable
1 = Enable
(default = 0)
14-01-25 Basic Trunk Data Setup –
Continued/Discontinued Trunk-
to-Trunk Conversation
When Program 24-02-10 is set to
disconnect a trunk after the
defined time, determine whether
or not a user should be able to use
the continue/discontinued code.
0 = Disable
1 = Enable
(default = 0)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day/Night Mode: 1~8
Class of Service for
Extensions: 1~15
Defaults:
All ports are set as
Class 1.
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
Turns Off (0) or On (1) the
Warning Tone for Long
Conversation (not for single line
telephones).
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-21-01 System Options for Long
Conversation – Long
Conversation Alarm 1
After a user places a trunk call, the
system sends the first warning
tone to their extension after this
time (0~64800 seconds).
0~64800 (seconds)
(default = 170)