NEC Univerge SV8100 - Page 1170

Issue 5.0 UNIVERGE SV8100
1 - 1160 Warning Tone for Long Conversation
20-21-02 System Options for Long
Conversation – Long
Conversation Alarm 2
After hearing the first warning
tone, the system sends additional
warning tones after this time
(0~64800 seconds). The warning
tones continue, spaced by this
time, until the user hangs up.
0~64800 (seconds)
(default = 180)
20-28-01 Trunk to Trunk Conversation –
Conversation Continue Code
Enter a single digit Continue Code
for the DISA call to use to
immediately disconnect or
continue their outside call (0~9,
*
or
# are accepted entries).
0~9, #, *
(default not assigned)
20-28-02 Trunk to Trunk Conversation –
Conversation Disconnect Code
Enter a single digit Disconnect for
the DISA call to use to
immediately disconnect or
continue their outside call (0~9,
*
or
# are accepted entries).
0~9, #, *
(default not assigned)
20-28-03 Trunk to Trunk Conversation –
Conversation Continue Time
When Program 14-01-25 is
enabled, determine the time a call
is extended when the user dials
the Continue code (defined in
Program 20-28-01).
0~64800 (seconds)
(default = 0 seconds)
21-01-01 System Options for Outgoing
Calls – Seizure Trunk Line Mode
When a trunk is selected does it
select it based off the Trunk Route
Priority (0) or based off the trunk
that has not been used in the
longest time.
0 = Priority Route
1 = Circular Route
(default = 0)
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
The system waits for this time to
expire before placing the call in a
talk state (Call Timer starts after
time expires, Voice Over and
Barge-In are not allowed until after
time expires).
0~64800 (seconds)
(default = 5 seconds)
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
Determine the time the system
should wait before the Warning
Tone is heard by DISA callers
(0~64800 seconds). If an outside
call is transferred or forwarded
off-premise using an outside trunk,
this time starts immediately. This
occurs if either trunk involved in
the call is programmed for the
Warning Tone (Program
14-01-17).
0~64800 (seconds)
(default = 3600
seconds)
Program
Number
Program Name Description/Comments Assigned Data