NEC Univerge SV8100 - Page 121

UNIVERGE SV8100 Issue 5.0
Automatic Route Selection 1 - 111
44-05-11 ARS/F-Route – Network
Specified Parameter Table
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Assign the Network Specified
Parameter Table (0~16).
0~16
(default = 0)
44-06-01 Additional Dial Table If an Additional Dial Number Table
is entered in Program 44-05-03,
define the additional dial table
(1~1000) to add digits in front of
the dialed ARS/F-Route number
(24 digits max: 1-9, 0
* #, Pause).
To enter a wild card/don’t care
digit, press Line Key 1 to enter a P
(pause) symbol.
Up to 24 digits
Enter: 1~9, 0,
*, #,
Pause (press line key 1
to enter a pause)
(default not assigned)
44-07-01 Gain Table for ARS/F-Route
Access – Incoming Transmit
Set the gain table to be used
(1~500). If an extension dials
ARS/F-Route number;
The Extension Dial Gain Table is
activated, which is assigned in
Program 44-05.
The Extension Dial Gain Table
follows Outgoing transmit and
Outgoing receive settings.
If the incoming call is transferred
to another line using ARS/
F-Route;
The Tandem Gain Table is
activated, which is assigned in
Program 44-05.
The Tandem Gain Table follows
the Incoming transmit and
Incoming receive settings for
incoming line, and Outgoing
transmit and Outgoing receive
settings for the outgoing line.
For ARS/F-Route calls, the
CODEC gains defined in Program
14-01-02 and Program 14-01-03
are not activated.
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-07-02 Gain Table for ARS/F-Route
Access – Incoming Receive
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-07-03 Gain Table for ARS/F-Route
Access – Outgoing Transmit
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-07-04 Gain Table for ARS/F-Route
Access – Outgoing Receive
1~63
(-15.5 ~ +15.5dB)
(default = 32)
44-08-01 Time Schedule for ARS/F-Route Define the daily pattern of the
ARS/F-Route feature. ARS/
F-Route has 10 time patterns.
These patterns are used in
Program 44-09 and Program
44-10. The daily pattern consists
of 20 time settings.
Time Number: 01~20
Start Time =
0000~2359
End Time = 0000~2359
Mode: 1~8
Default = All Schedule
Patterns: 0:00 – 0:00,
Mode 1
Program
Number
Program Name Description/Comments Assigned Data