NEC Univerge SV8100 - Page 143

UNIVERGE SV8100 Issue 5.0
Call Appearance (CAP) Keys 1 - 133
Off-Hook Signaling
Programmable Function Keys
User Programming Ability
Virtual Extensions
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
(
*08 + XXXX = CAP
key where XXXX is the
CAP orbit number
0001-9999)
20-02-23 Phone Operation Mode Selects the Loop Key operation
mode.
0 = Original Operation
Mode (CAP Key)
1 = Special Operation
Mode (Loop
Key)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06,
1 = Extended for Program
24-01-07).
0 = Off
1 = On
(default = 0 for COS
1~15)
24-01-01 Hold Recall Time A call on Hold recalls the
extension that placed it on Hold
after this time. This time works
with the Hold Recall Callback
Time.
0~64800 (seconds)
(default = 90)