NEC Univerge SV8100 - Page 151

UNIVERGE SV8100 Issue 5.0
Call Forwarding – Park and Page 1 - 141
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-58 Service Code Setup (for Setup/
Entry Operation) – Call Forward
with Personal Greeting
Call forward with Personal
greeting VRS. Service code
setup.
MLT, SLT
(default = 795)
11-12-19 Service Code Setup (for Service
Access) – Internal Group Paging
Service code setup. MLT, SLT
(default = 801)
11-12-20 Service Code Setup (for Service
Access) – External Paging
External paging access code.
Service code setup.
MLT, SLT
(default = 803)
11-12-24 Service Code Setup (for Service
Access) – Combined Paging
Combined paging, internal/
external access code. Service
code setup.
MLT, SLT
(default = 751)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
0~64
(0 = No Setting)
Default:
0 for IP Station
1 for TDM Station
31-03-01 Internal Paging Group Settings –
Internal Paging Group Name
Assign names to Internal Paging
Groups (i.e., Page Zones). The
system shows the names you
program on the telephone
displays.
Up to 12 Characters
01 = Group 1
02 = Group 2
:
64 = Group 64