NEC Univerge SV8100 - Page 152

Issue 5.0 UNIVERGE SV8100
1 - 142 Call Forwarding – Park and Page
Operation
To have the system page you when you have a call:
1. Press Speaker (or lift the handset at the single line telephone) and dial 795.
2. When you hear, “Please start recording,” record you Personal Greeting.
31-04-01 External Paging Zone Group –
Paging Group Number
Assign each External Paging
Speaker to an External Paging
Zone.
Paging Group Number
0~8 (0 = No Setting)
Speaker 1 [PGD(2)-U10
ADP] = 1 (Group 1)
Speaker 2 [PGD(2)-U10
ADP] = 2 (Group 2)
Speaker 3 [PGD(2)-U10
ADP] = 3 (Group 3)
Speaker 4 [PGD(2)-U10
ADP] = 4 (Group 4)
Speaker 5 [PGD(2)-U10
ADP] = 5 (Group 5)
Speaker 6 [PGD(2)-U10
ADP] = 6 (Group 6)
Speaker 7 [PGD(2)-U10
ADP] = 7 (Group 7)
Speaker 8 [PGD(2)-U10
ADP] = 8 (Group 8)
Speaker 9 (CD-CP00) =
1 (Group 1)
31-06-01 External Speaker Control –
Broadcast Splash Tone Before
Paging (Paging Start Tone)
Use this option to enable or
disable splash tone before Paging
over an external zone. If enabled,
the system broadcasts a splash
tone before the External Paging
announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
31-06-02 External Speaker Control –
Broadcast Splash Tone After
Paging (Paging End Time)
Use this option to enable or
disable splash tone after Paging
over an external zone. If enabled,
the system broadcasts a splash
tone at the end of an External
Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
40-10-01 Voice Announcement Service
Option – VRS Fixed Message
Enable (1) or disable (0) the
system ability to play the fixed
VRS messages (such as You have
a message.).
0= Not Used
1= Used
(default = 0)
40-10-05 Voice Announcement Service
Option – Park and Page Repeat
Timer (VRS Msg Resend)
If a Park and Page is not picked up
in this interval, the Paging
announcement repeats.
0~64800 (seconds)
(default = 0 seconds)
Program
Number
Program Name Description/Comments Assigned Data