NEC Univerge SV8100 - Page 159

UNIVERGE SV8100 Issue 5.0
Call Forwarding 1 - 149
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-10-06 Service Code Setup (for System
Administrator) – Setting the
Automatic Transfer for Each
Trunk Line
Set the service code for setting
automatic transfer for each trunk
line.
MLT
(default = 833)
11-10-07 Service Code Setup (for System
Administrator) – Canceling the
Automatic Transfer for Each
Trunk Line
Set the service code for canceling
automatic transfer for each trunk
line.
MLT
(default = 834)
11-10-08 Service Code Setup (for System
Administrator) – Setting the
Destination for Automatic Trunk
Transfer
Set the service code for setting the
destination for automatic trunk
transfer.
MLT
(default = 835)
11-10-18 Service Code Setup (for System
Administrator) – Off-Premise
Call Forward by Door Box
Set the service code for setting
automatic transfer for each trunk
line.
MLT
(default = 822)
11-11-01 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– All
Set the service code for setting call
forwarding all calls.
MLT, SLT
(default = 848)
11-11-02 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy
Set the service code for setting call
forwarding for busy calls.
MLT, SLT
(default = 843)
11-11-03 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– No Answer
Set the service code for setting call
forwarding for no answer.
MLT, SLT
(default = 845)
11-11-04 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy/No Answer
Set the service code for setting
call forwarding for busy or no
answer.
MLT, SLT
(default = 844)
11-11-05 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Both Ring
Set the service code for setting
call forwarding for busy or no
answer.
MLT, SLT
(default = 842)
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
Set the service code for setting
call forwarding for follow me.
MLT, SLT
(default = 846)
11-11-08 Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
Set the service code for setting
call forwarding for Do Not Disturb.
MLT, SLT
(default = 847)
11-11-45 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward All (Split)
Set or Cancel the call forward all
split.
MLT, SLT
(default = 782)
11-11-46 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy (Split)
Set or Cancel the call forward
busy split.
MLT, SLT
(default = 783)