NEC Univerge SV8100 - Page 160

Issue 5.0 UNIVERGE SV8100
1 - 150 Call Forwarding
11-11-47 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward No Answer (Split)
Set or Cancel the call forward no
answer split.
MLT, SLT
(default = 784)
11-11-48 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy/No Answer
(Split)
Set or Cancel the call forward
busy or no answer split.
MLT, SLT
(default = 785)
11-11-49 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Both Ring (Split)
Set or Cancel the call forward the
both ring split.
MLT, SLT
(default = 786)
11-11-52 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward All Destination (No
Split)
Set or Cancel the call forward all
destination with no split.
MLT, SLT
(default = 791)
11-11-53 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy Destination
(No Split)
Set or Cancel the call forward
busy destination with no split.
MLT, SLT
(default = 792)
11-11-54 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward No Answer
Destination (No Split)
Set or Cancel the call forward no
answer destination with no split.
MLT, SLT
(default = 793)
11-11-55 Service Code Setup (for Setup/
Entry Operation) – Call Forward
Busy No Answer Destination (No
Split)
Set or Cancel the call forward
busy or no answer destination with
no split.
MLT, SLT
(default = 794)
11-11-58 Service Code Setup (for Setup/
Entry Operation) – Call forward
with Personal Greeting
Set the service code for setting
call forwarding with Personal
Greeting.
MLT, SLT
(default = 795)
11-12-01 Service Code Setup (for Service
Access) – Bypass Call
Use to customize the Service
Codes which are used for bypass
calls.
MLT, SLT
(default = 807)
11-16-06 Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
Use to customize the one-digit
Service Codes used when a busy
or ring back signal is heard.
(default not assigned)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
Program
Number
Program Name Description/Comments Assigned Data