Issue 5.0 UNIVERGE SV8100
1 - 160 Call Forwarding with Follow Me
Related Features
Do Not Disturb
Programmable Function Keys
Guide to Feature Programming
Operation
To activate Call Forward Follow Me from a multiline terminal:
1. At a multiline terminal, other than your own, press Speaker and dial Service Code (846, Program
11-11-07).
- OR -
Press the Call Forward Follow Me key (Program 15-07-01 or SC 851: Code 15).
Program
Number
Program Name Description/Comments Assigned Data
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
Assign the service code of Call
Forward Follow Me.
MLT, SLT
(default = 846)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
(15 = Call Forward with
Follow Me)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-11-05 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding with Follow Me
In an extension's Class of Service,
turn On (1) or Off (0) an
extensions ability to set Call
Forward with Follow Me.
0 = Off
1 = On
(default = 1 for
COS 1~15)
To Next Page
Loading...
