NEC Univerge SV8100 - Flexible Call Routing

UNIVERGE SV8100 Issue 5.0
Call Forwarding with Follow Me 1 - 161
2. Dial 1 to set.
3. Dial the Extension to forward.
. The multiline terminal with display indicates on the display of the telephone which Call Forward Follow Me is
set. Also, the Programmed Follow Me Flexible Line Key flashes (if assigned) when Follow Me is set.
To cancel Call Forward Follow Me from your own Multiline Terminal:
1. At your multiline terminal, press Speaker and dial Service Code (846, Program 11-11-07).
- OR -
Press the Call Forward Follow Me key (Program 15-07-01 or SC 851: Code 15).
2. Dial 0 to cancel.
3. Dial 0 (Cancel All Forward Follow Me).
- OR -
Dial the extension number with Follow Me set.
To activate Call Forward Follow Me from a single line telephone:
1. At a single line telephone, other than your own, lift the handset and dial the Service Code (846
Program 11-11-07).
2. Dial 1 to set.
3. Dial the extension to forward.
To cancel Call Forward Follow Me from your own single line telephone:
1. At your single line telephone, lift the handset and dial Service Code (846, Program 11-11-07).
2. Dial 0 to cancel.
3. Dial 0 (Cancel All Forward Follow Me).
- OR -
Dial the extension number with Follow Me set.