UNIVERGE SV8100 Issue 5.0
Central Office Calls, Answering 1 - 237
15-06-01 Trunk Access Map for
Extensions
Assign Trunk Access Maps to
extensions.
Trunks 1~200
(default = 1)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
15-25-01 DESI-less Page Setup –
Incoming Call Notify Event
Enable/Disable the ability of a
DESI-less terminal to blink the
page number that has an incoming
call on one of the keys.
0 = Disable
1 = Enable
(default = 1)
15-25-02 DESI-less Page Setup –
Incoming Call Automatic Screen
Switching
Enable/Disable the ability of a
DESI-less terminal to switch to the
page that has an incoming call on
one of the keys.
0 = Disable
1 = Enable
(default = 1)
15-25-03 DESI-less Page Setup – Idle
Automatic Screen Switching
Define or Disable the page to be
automatically displayed when a
DESI-less terminal becomes idle.
0 = Disable
1 = Display page 1
2 = Display page 2
3 = Display page 3
4 = Display page 4
(default = 0)
15-25-04 DESI-less Page Setup – Answer
Automatic Screen Switching
Define or Disable the page to be
automatically displayed when a
DESI-less terminal answers a call.
0 = Disable
1 = Display page 1
2 = Display page 2
3 = Display page 3
4 = Display page 4
(default = 0)
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
Use this option to enable (1) or
disable (0) disconnect supervision
for the system trunks.
0 = Disable
1 = Enable
(default = 1)
20-02-15 System Options for Multiline
Telephones – Caller ID Display
Mode
Use to define the Caller ID display
mode for multiline terminals.
0 = Name and Number
(Both)
1 = Name
2 = Number
(default = 0)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
