NEC Univerge SV8100 - Page 261

UNIVERGE SV8100 Issue 5.0
Central Office Calls, Placing 1 - 251
15-02-01 Multiline Telephone Basic Data
Setup – Display Language
Selection
(To select options 8~10, press
either 8 or Recall, then press line
keys 1~3. Key 1 is option 8, Key 2
is option 9, and Key 3 is option 10.)
Use to define the display language
for Multiline terminals.
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
(default = 1)
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
Use this option to set whether
pressing a key accesses a
One-Touch Key (1) or if it
preselects the key (0).
0 = Preselect
1 = One-Touch
(Automatic Handsfree)
(default = 1)
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
0 = Normal
1 = Special
(default = 0)
15-06-01 Trunk Access Map for
Extensions
Assign Trunk Access Maps to
extensions.
Trunks 1~200
(default = 1)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
15-13-01 Loop Key - Outgoing Used to define an outgoing loop
key
0~100(0 = Assigns
Loop Key to all Trunk
Groups
1~100 = Assigns Loop
Key to specified Trunk
Group
Program
Number
Program Name Description/Comments Assigned Data