NEC Univerge SV8100 - Page 269

UNIVERGE SV8100 Issue 5.0
Class of Service 1 - 259
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-24 Service Code Setup (for Setup/
Entry Operation) – Change
Station Class of Service
If required, use this option to
change the Service Code a user
dials to change an extension
Class of Service.
MLT
(default = 777)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-07-01 Class of Service Options
(Administrator Level) – Manual
Night Service Enabled
Turns Off (0) or On (1) an
extension for manually Switching
the Night Mode (Service Code
818). This option must be enabled
for an extension to be able to
display the Night indication.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-02 Class of Service Options
(Administrator Level) –
Changing the Music on Hold
Tone
Turn off or on extension user
ability to change the Music on
Hold tone.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-03 Class of Service Options
(Administrator Level) – Time
Setting
Turn off or on extension user
ability to set the Time via Service
Code 828.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-07-04 Class of Service Options
(Administrator Level) – Storing
Speed Dialing Entries
Turns Off (0) or On (1) an
extension to store System or
Group Speed Dialing numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-07-05 Class of Service Options
(Administrator Level) – Set/
Cancel Automatic Trunk-to-
Trunk Transfer
Turn On (1) or Off (0) the ability of
an extension to use the
Trunk-to-Trunk Forwarding service
codes.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
Turns Off (0) or On (1) the ability
for an extension to program the
Appearance function keys using
Service Code 852.
0 = Off
1 = On
(default = 1 for COS
01~15)