NEC Univerge SV8100 - Page 270

Issue 5.0 UNIVERGE SV8100
1 - 260 Class of Service
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
Turns Off (0) or On (1) an
extension to use Forced Trunk
Disconnect. This allows the
extension to disconnect an
Unsupervised Conference in
progress.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-12 Class of Service Options
(Administrator Level) – Trunk
Port Disable
Turn Off (0) or On (1) the
extension ability to use the Trunk
Port Disable feature.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-13 Class of Service Options
(Administrator Level) – VRS
Record (VRS Msg Operation)
Turns Off (0) or On (1) an
extension ability to record, erase
and listen to VRS messages.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-14 Class of Service Options
(Administrator Level) – VRS
General Message Play
Turns an extension Off (0) or On
(1) to dial 4 or Service Code 711 to
listen to the General Message.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-15 Class of Service Options
(Administrator Level) – VRS
General Message Record/Delete
Turns Off (0) or On (1) an
extension for dialing Service Code
712 and record, listen to, or erase
the General Message.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-18 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Extension
Data
Determine if the Accumulated
Extension Data is included in the
SMDR printout for each Class of
Service.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-19 Class of Service Options
(Administrator Level) – SMDR
Printout Department Group
(STG) Data
Determine if the Department
Group STG) Data is included in
the SMDR printout for each Class
of Service.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
Program
Number
Program Name Description/Comments Assigned Data