NEC Univerge SV8100 - Page 271

UNIVERGE SV8100 Issue 5.0
Class of Service 1 - 261
20-07-20 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Account
Code Data
Determine if the Accumulated
Account Code Data is included in
the SMDR printout for each Class
of Service.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-07-21 Class of Service Options
(Administrator Level) – Register/
Delete DECT
Turn off or on extension user
ability to register or unregister an
Wireless DECT (SIP) handset
using the service codes defined in
Program 11-10-30 and Program
11-10-31.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-07-23 Class of Service Options
(Administrator Level) – CO
Message Waiting Indication
Callback Number Programming
Enable or disable an extension
ability to receive CO Message
Waiting Indication.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-07-24 Class of Service Options
(Administrator Level) – Set/
Cancel Private Call Refuse
Enable or disable an extension
ability to set or cancel Private Call
Refuse.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-07-25 Class of Service Options
(Administrator Level) – Set/
Cancel Caller ID Refuse
Enable or disable an extension
ability to set or cancel Caller ID
Refuse.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-07-26 Class of Service Options
(Administrator Level) – Dial-In
Mode Switch
Enable or Disable an extension
user ability to set or cancel dial-in
mode switch.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-07-27 Class of Service Options
(Administrator Level) –
Do-Not-Call Administrator
Enable or Disable an extension
user ability to set or cancel do not
call administrator.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
Turn Off or On Intercom calling for
the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-02 Class of Service Options
(Outgoing Call Service) – Trunk
Outgoing Calls
Turns off (0) or on (1) outgoing
trunk calling for the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-03 Class of Service Options
(Outgoing Call Service) – System
Speed Dialing
Turns Off (0) or On (1) an
extension ability to make outbound
calls using system speed dial
numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data