NEC Univerge SV8100 - Page 272

Issue 5.0 UNIVERGE SV8100
1 - 262 Class of Service
20-08-04 Class of Service Options
(Outgoing Call Service) – Group
Speed Dialing
Turns Off (0) or On (1) an
extension ability to make outbound
calls using group speed dial
numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
Turn off or on extension user
ability to use Dial Number Preview.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
Turn off or on Toll Restricting
Override (Service Code 763).
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
Turns Off (0) or On (1) an
extension to use Repeat Redial.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-08 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Dial Block
Turn off or on an extension user
ability to use Dial Block.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
Turn off or on Ringdown Extension
for extensions with this COS.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
Turns Off or On an extension
allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom
calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice
announce mode.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
Turn off or on an extension user
ability to use Department Group
Step Calling.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
Determine if the ISDN calling line
identity presentation and
screening indicators are to be
allowed.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
Use to enable or disable Call
Address Information for each
Class of Service.
0 = Off
1 = On
(default = 0 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data