NEC Univerge SV8100 - Page 274

Issue 5.0 UNIVERGE SV8100
1 - 264 Class of Service
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Turns off or on the extension
ability to receive a second call
from a DID, DISA, DIL, or tie line
caller.
. With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a line or Call
Appearance (CAP) Keys
available for the second call
and a previous call is ringing
the extension but has not
been answered, the second
caller hears busy regardless
of this program setting.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
Turns Off (0) or On (1) the Caller
ID display at an extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
Define whether an extension
displays the Caller Sub-Address.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
Determine whether or not the
CHECK LIST message is
displayed to indicate a missed call.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Turn off or on an extension ability
to enable Handsfree Answerback
or Forced Intercom Ringing for
their incoming Intercom calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminals LCD while
the telephone is ringing.
0 = Off
1 = On
(default = 0 for COS
01~15)
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-09-08 Class of Service Options
(Incoming Call Service) – Calling
Party Information
Turn off or on and extension user
ability to display calling party
information on CCIS calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data