NEC Univerge SV8100 - Page 276

Issue 5.0 UNIVERGE SV8100
1 - 266 Class of Service
20-11-02 Class of Service Options (Hold/
Transfer Service) – Call Forward
When Busy
In an extension Class of Service,
turn On (1) or Off (0) the ability of
an extension user to set Call
Forwarding when Busy.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-03 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding When Unanswered
In an extension Class of Service,
turn On (1) or Off (0) the ability of
an extension user to set Call
Forwarding when Unanswered.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-04 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding (Both Ringing)
In an extension Class of Service,
turn On (1) or Off (0) an extension
user ability to set Call Forward
with Follow Me.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-05 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding with Follow Me
In an extension's Class of Service,
turn On (1) or Off (0) an
extensions ability to set Call
Forward with Follow Me.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-06 Class of Service Options (Hold/
Transfer Service) – Unscreened
Transfer (Ring Inward Transfer)
Turns Off (0) or On (1) an
extension ability to use
Unscreened Transfer.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-07 Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
Turn Off or On an extension ability
to use Transfer Without Holding.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-08 Class of Service Options (Hold/
Transfer Service) – Transfer
Information Display
Turn off or on an extension
incoming Transfer pre-answer
display.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-09 Class of Service Options (Hold/
Transfer Service) – Group Hold
Initiate
Turn off or on an extension ability
to initiate a Group Hold.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-10 Class of Service Options (Hold/
Transfer Service) – Group Hold
Answer
Turn off or on an extension ability
to pick up a call on Group Hold.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic
On-Hook Transfer
Turn Off (0) or On (1) an
extension ability to use Automatic
On-Hook Transfer.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-12 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding Off-Premise
(External Call Forwarding)
In an extensions Class of Service,
turn On (1) or Off (0) setting up
Call Forwarding Off-Premise at the
extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data