NEC Univerge SV8100 - Page 278

Issue 5.0 UNIVERGE SV8100
1 - 268 Class of Service
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
In an extension Class of Service,
turn On (1) or Off (0) the ability to
set and cancel Call Forwarding for
a CAR or Virtual Extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
Set the hold type when a trunk call
is put on hold by an extension.
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
Turn on or off an extension user
ability to transfer a parked call.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-11-27 Class of Service Options (Hold/
Transfer Service) – Call Park
Automatically Search
Use this option to turn On (1) or
Off (0) using the Call Park
Automatically Search option.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-12-02 Class of Service Options
(Charging Cost Service) –
Advice of Charge
ISDN-AOC
This option turns off (0) or on (1) a
DISA or tie trunk caller’s ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
ISDN billing information 0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
Turns Off (0) or On (1) the
Warning Tone for Long
Conversation (not for single line
telephones).
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
Turn off or on an extension user
ability to use Long Conversation
Cutoff for incoming calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-03 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
Turn off or on an extension user
ability to use Long Conversation
Cutoff for outgoing calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-04 Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
Turn On or Off the ability to use
Call Forwarding/DND Override.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data