NEC Univerge SV8100 - Page 313

UNIVERGE SV8100 Issue 5.0
Code Restriction Override 1 - 303
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed
Number
Determine how the SMDR should
print incoming calls on ANI/DNIS
or DID trunks. If set to (1), ANI/
DNIS trunks can print DNIS digits.
If set to (0) trunk names are
printed instead.
0 = Trunk Port Name
1 = Received Dialed
Number
(default = 0)
35-02-17 SMDR Output Options – Print
Account Code or Caller Name of
Incoming Call
Determine if SMDR should print
Account Code or Caller Name of
Incoming Call.
0 = ACC
1 = CNAME
(default = 0)
35-02-18 SMDR Output Options – Print
Mode for Caller Name of
Incoming Call
Determine how SMDR should print
Caller Name of Incoming Call.
0 = Normal
1 = Line Feed
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data