Issue 5.0 UNIVERGE SV8100
1 - 318 Conference
. To get the outside call, you can either press a line key or press the Speaker key and dial 9, the Trunk Access Code
+ the trunk number (default 805). You can optionally go back to step 2 to add more parties to your Conference.
4. When called party answers, press the Conf softkey or Conf twice.
. If you cannot add additional parties to your Conference, you have exceeded the system Conference limit.
. If the call being added is busy/unanswered:
With an outside call, press the line or Call Appearance (CAP) key for a call previously added to the Conference.
The unanswered call drops and the initiator is back into the Conference call.
. Adding an Intercom call to an outside Conference call: Press the Conf softkey on the Multiline Terminal display
or Conf twice to re-establish the Conference. If using a non-display telephone, press Conf twice.
. With only Intercom calls in the Conference: Press Conf twice to re-establish the Conference. If the voice mail
answers, there is no way to drop that extension out. You must drop the Conference call.
5. Repeat steps 2~4 to add more parties.
To Next Page
Loading...
