NEC Univerge SV8100 - Page 327

UNIVERGE SV8100 Issue 5.0
Conference 1 - 317
Operation
To establish a Conference:
Multiline Terminal
1. Establish intercom or trunk call.
2. Press Conf or Conf softkey (Program 15-07 or SC 851: 07).
3. Dial the extension you want to add.
- OR -
Access outside call.
- OR -
Retrieve call from Park orbit.
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
Allow (0) or deny (1) an extension
users’s ability to set up a tandem/
conference call automatically
when they hang up.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-08 Class of Service Options
(Supplementary Service) –
Conference
Turn off or on an extension ability
to initiate a conference or Meet Me
Conference.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-10 Class of Service Options
(Supplementary Service) –
Barge-In Monitor
In an extension Class of Service,
enable the Barge-In Speech Mode
(0) or Monitor Mode (1) at the
initiating extension (i.e., Barge-In
initiator).
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-15 Class of Service Options
(Supplementary Service) –
Barge-In, Initiate
Turns Off (0) or On (1) an
extension user ability to barge-in
on other's calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-16 Class of Service Options
(Supplementary Service) –
Barge-In, Receive
In an extension Class of Service,
turn On (1) or Off (0) Barge-In at
the receiving extension (i.e.,
Barge-In receive).
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
In an extension Class of Service,
enable (1) or disable (0) a DISA or
tie trunk user from using the
Barge-In feature.
0 = Off
1 = On
(default = 0 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data