NEC Univerge SV8100 - Page 348

Issue 5.0 UNIVERGE SV8100
1 - 338 Delayed Ringing
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
14-07-01 Trunk Access Map Setup Set up the Trunk Access Maps.
This sets the access options for
trunks. Ring Group programming
overrides Access Map
programming.
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
15-06-01 Trunk Access Map for
Extensions
Assign Trunk Access Maps to
extensions.
Trunks 1~200
(default = 1)
15-07-01 Programmable Function Keys Assign VE function keys (code
*03 + extension number) or CO
function keys (Code
*01 + trunk
port) on multiline terminals.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
15-09-01 Virtual Extension Ring
Assignment
Individually program an extension
Virtual Extension key(s) to either
ring (1) or not ring (0).
Mode 1:
0 = Not Ring
1 = Ring
(default = 0)