NEC Univerge SV8100 - Page 349

UNIVERGE SV8100 Issue 5.0
Delayed Ringing 1 - 339
Operation
To answer Delay Ringing calls:
1. Go off-hook.
- OR -
Press Answer.
15-11-01 Virtual Extension Delayed Ring
Assignment
Use to assign the delayed ringing
options for an extension Virtual
Extension or Virtual Extension
Group Answer keys (defined in
Program 15-09).
KY01 Mode 1:
0 = (No) Immediate
Ring
1 = (Yes) Delay Ring
(default = 0)
20-04-03 System Options for Virtual
Extensions – Virtual Extension
Delay Interval
Virtual Extensions set for Delayed
Ringing (see Program 15-11) ring
the extension after this interval.
0~64800 (seconds)
(default = 10 seconds)
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
A DIL that rings its programmed
destination longer than this
interval diverts to the DIL No
Answer Ring Group (set in
Program 22-08).
0~64800 (seconds)
(default = 0 seconds)
22-02-01 Incoming Call Trunk Setup Use this option to set the feature
type for the trunk you are
programming.
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
22-08-01
DIL/IRG No Answer Destination
If an incoming trunk call rings
longer than the DIL No Answer
Time (Program 22-01-04), it routes
to the destination you specify in
this option. Determine if the
destination should be a Ring
Group, In-Skin/External Voice
Mail, or Central Voice Mail.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or InMail)
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data