NEC Univerge SV8100 - Page 358

Issue 5.0 UNIVERGE SV8100
1 - 348 Department Calling
Required Component(s)
VRS for Messaging
Related Features
Call Arrival (CAR) Keys
Call Forwarding
Department Step Calling
Transfer
InMail
Voice Response System (VRS)
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-07-01
Department Group Pilot Numbers
– Dial
Use to assign pilot numbers to
each Department Group set up.
Up to eight digits
(default not assigned)
11-11-25
Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each
Extension Group
Use this option to set the service
code to activate immediate
automatic transfer for ICM and
transferred calls to Department
Groups.
MLT, SLT
(default = 702)
11-11-26
Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
Use this option to set the service
code to deactivate immediate
automatic transfer for ICM and
transferred calls to Department
Groups.
MLT, SLT
(default = 703)
11-11-27
Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
Use this option to set the service
code for setting the destination for
immediate automatic transfer for
ICM and transferred calls to
Department Groups.
MLT
(default = 704)
11-11-28 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer for Every Extension
Group
Use this service code to set the
delayed transfer destination
Department Group.
MLT, SLT
(default = 705)