Issue 5.0 UNIVERGE SV8100
1 - 352 Department Calling
24-02-05 System Options for Transfer –
Message Wait Ring Interval Time
For Single Line Telephones
(SLTs) without message waiting
lamps, this is the time between
intermittent ringing. If this value is
set to 0, the system rings once.
0~64800 (seconds)
(default = 30 seconds)
24-02-08 System Options for Transfer –
Delayed Transfer Timer for All
Department Groups
Determine the time a call should
ring a Department Group before
transferring the call.
0~64800 (seconds)
(default = 10 seconds)
24-05-01 Department Group Transfer
Target Setup
Assign the Speed Dial bin to each
Department Group to hold the
destination for the immediate
automatic transfer of ICM and
transferred calls to the Department
Group feature.
0~1999
(default = 1999)
40-01-10 Department Group Call when the
Automated Attendant is
activated
Used to enable or disable
Department Group Call when the
Automated Attendant is activated.
0 = Disabled (Off)
1 = Enabled (On)
(Default = 0)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
