Issue 5.0 UNIVERGE SV8100
1 - 356 Department Call Forward
Default Setting
The service code to enable department group forwarding is 702 ('Automatic Transfer Setup per
Extension Group').
The service code to disable department group forwarding is 703 ('Automatic Transfer
Cancellation per Extension Group').
The service code to set/change the destination number is 704 ('Automatic Transfer Destination
per Extension Group').
Abbreviated Dial bin 1999 is used as the call forward destination for all night modes.
The disconnect timers are set to give a warning tone after 30 seconds and then disconnect after
another 15 seconds.
The outgoing trunk route is not defined.
Disconnect clear is not set.
'Set Automatic Transfer at Extension Group Call' is on in Class of Service.
System Availability
Terminals
All Terminals
Required Component(s)
VRS for Messaging
Related Features
Call Arrival (CAR) Keys
Call Forwarding
Department Step Calling
Transfer
To Next Page
Loading...
