UNIVERGE SV8100 Issue 5.0
Department Call Forward 1 - 357
InMail
Voice Response System (VRS)
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-07-01
Department Group Pilot Numbers
– Dial
Use to assign pilot numbers to
each Department Group set up.
Up to eight digits
(default not assigned)
11-11-25
Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each
Extension Group
Use this option to set the service
code to activate immediate
automatic transfer for ICM and
transferred calls to Department
Groups.
MLT, SLT
(default = 702)
11-11-26
Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
Use this option to set the service
code to deactivate immediate
automatic transfer for ICM and
transferred calls to Department
Groups.
MLT, SLT
(default = 703)
11-11-27
Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
Use this option to set the service
code for setting the destination for
immediate automatic transfer for
ICM and transferred calls to
Department Groups.
MLT
(default = 704)
11-11-28 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer for Every Extension
Group
Use this service code to set the
delayed transfer destination
Department Group.
MLT, SLT
(default = 705)
11-11-29 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer Cancellation for Each
Extension Group
Use this service code to cancel the
delayed transfer destination
Department Group.
MLT, SLT
(default = 706)
11-12-09 Service Code Setup (for Service
Access) – Change to STG
(Department Group) All Ring
Use this option to set the service
code for ringing all members of a
Department Group.
MLT, SLT
(default = 780)
11-16-10 Single Digit Service Code Setup
– (Department) STG All Ring
Mode
Assign the Single Digit
(post-dialing) Service Code for All
Member Ring.
(default not assigned)
To Next Page
Loading...
