NEC Univerge SV8100 - Page 428

Issue 5.0 UNIVERGE SV8100
1 - 418 Direct Inward System Access (DISA)
25-03-01 VRS/DISA Transfer Ring Group
With Incorrect Dialing
Set the operating mode of each
DISA trunk. This sets what
happens to the call when the DISA
caller dials incorrectly. The call
can either disconnect (0), transfer
to an alternate ring group
destination, or transfer to In-Skin/
External Voice Mail, or Centralized
Voice Mail.
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or InMail)
(default = 0)
25-04-01 VRS/DISA Transfer Ring Group
With No Answer/Busy
Set the operating mode of each
DISA trunk. This sets what
happens to the call when the DISA
caller calls a busy or unanswered
extension. The call can either
disconnect (0), or transfer to an
alternate ring group destination,
In-Skin/External Voice Mail, or
Centralized Voice Mail.
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or InMail)
(default = 0)
25-05-01 VRS/DISA Error Message
Assignment
Assign the VRS message number
to be used as the Automated
Attendant error message. For
each VRS/DISA trunk that the
VRS answers, enter the VRS
message (1~100) the outside
caller hears if they dial incorrectly.
If you enter 0 (i.e., no error
message), the call reroutes
according to Program 25-03 and
Program 25-04. For each trunk,
you make a separate entry for
each Night Service mode.
0~100 (0 = No Setting)
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data