NEC Univerge SV8100 - Page 460

Issue 5.0 UNIVERGE SV8100
1 - 450 Distinctive Ringing, Tones and Flash Patterns
15-08 Incoming Virtual Extension Ring
Tone Setup
Use to assign a ring tone range
(0~4) to incoming virtual
extensions assigned to a Virtual
Extension key (Program 15-07).
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
(default = 0)
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
When two or more virtual
extensions are set on a function
key on the telephone, and the tone
pattern by which the sound of
each extension differs, the priority
of ring sound is set up.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Determine if a BLF of the station
will light when a Normal CO call is
ringing the phone.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-15-01 Ring Cycle Setup – Normal
Incoming Call on Trunk
Used to define the ringing cycle for
Normal Incoming Trunk calls.
Ringing Cycle = 1~13
(default = 8)
20-15-02 Ring Cycle Setup – PBX, CES
Incoming Call
Used to define the ringing cycle for
PBX, CES incoming calls.
Ringing Cycle = 1~13
(default = 8)
20-15-03 Ring Cycle Setup – Incoming
Internal Call
Used to define the ringing cycle for
incoming Internal Calls.
Ringing Cycle = 1~13
(default = 12)
20-15-04 Ring Cycle Setup – DID/DISA/
VRS
Used to define the ringing cycle for
DID/DISA/VRS Calls.
Ringing Cycle = 1~13
(default = 8)
20-15-05 Ring Cycle Setup – DID/DDI Used to define the ringing cycle for
DID/DDI calls.
Ringing Cycle = 1~13
(default = 8)
20-15-06 Ring Cycle Setup – Dial-In in the
E&M Tie Line
Used to define the ringing cycle for
Dial-In and E&M Tie Line calls.
Ringing Cycle = 1~13
(default = 12)
20-15-07 Ring Cycle Setup – Door Box
Ringing for SLT
Used to define the ringing cycle for
Door Box ringing for SLT.
Ringing Cycle = 1~13
(default = 8)
20-15-08 Ring Cycle Setup – Virtual
Extension Ring
Used to define the ringing cycle for
Virtual Extension Ringing.
Ringing Cycle = 1~13
(default = 8)
20-15-09 Ring Cycle Setup – Callback Used to define the ringing cycle for
Callback.
Ringing Cycle = 1~13
(default = 11)
20-15-10 Ring Cycle Setup – Alarm for
SLT
Used to define the ringing cycle for
Alarm for SLT.
Ringing Cycle = 1~13
(default = 5)
Program
Number
Program Name Description/Comments Assigned Data