NEC Univerge SV8100 - Page 520

Issue 5.0 UNIVERGE SV8100
1 - 510 Flexible System Numbering
11-11-29 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer Cancellation for Each
Extension Group
Use to customize the delayed
transfer cancellation for each
extension group used for
registration and setup.
MLT, SLT
(default = 706)
11-11-30 Service Code Setup (for Setup/
Entry Operation) – DND Setup
for Each Extension Group
Use to customize the Service
Codes which are used for
registration and setup.
MLT, SLT
(default = 707)
11-11-31 Service Code Setup (for Setup/
Entry Operation) – DND
Cancellation for Each Extension
Group
Use to customize the DND
cancellation for each extension
group used for registration and
setup.
MLT, SLT
(default = 708)
11-11-33 Service Code Setup (for Setup/
Entry Operation) – Dial Block
Use to customize the dial block
used for registration and setup.
MLT, SLT
(default = 700)
11-11-34 Service Code Setup (for Setup/
Entry Operation) – Temporary
Toll Restriction Override
Use to customize the temporary
toll restriction override used for
registration and setup.
MLT, SLT
(default = 875)
11-11-35 Service Code Setup (for Setup/
Entry Operation) – Pilot Group
Withdrawing
Use to customize the Service
Codes which are used for
registration and setup.
MLT, SLT
(default = 750)
11-11-36 Service Code Setup (for Setup/
Entry Operation) – Toll
Restriction Override
Use to customize the toll
restriction override used for
registration and setup.
MLT, SLT
(default = 763)
11-11-37 Service Code Setup (for Setup/
Entry Operation) – Ring Volume
Set
Use to customize the ring volume
set used for registration and setup.
MLT
(default = 829)
11-11-38 Service Code Setup (for Setup/
Entry Operation) –
Programmable Function Key
Programming (3-Digit Service
Codes)
Use this option to set the service
code (default 752) to assign 3-digit
function codes to the Function
keys.
MLT
(default = 852)
11-11-39 Service Code Setup (for Setup/
Entry Operation) – Station Speed
Dial Number Entry
Use to customize the station
speed dial entry used for
registration and setup.
ML, SLT
(default = 855)
11-11-41 Service Code Setup (for Setup/
Entry Operation) – Tandem
Ringing
Use to customize the tandem
ringing used for registration and
setup.
MLT, SLT
(default = 744)
11-11-42 Service Code Setup (for Setup/
Entry Operation) – SV8100
Wireless Transferring When Out
of Range
Customize the service code to be
used when setting a Wireless
DECT (SIP) telephone to transfer
calls when out of range.
SV8100 Wireless
(default not assigned)
11-11-43 Service Code Setup (for Setup/
Entry Operation) – Headset
Mode Switching
Use to customize the headset
mode switching used for
registration and setup.
MLT, SLT
(default = 788)
Program
Number
Program Name Description/Comments Assigned Data