NEC Univerge SV8100 - Page 522

Issue 5.0 UNIVERGE SV8100
1 - 512 Flexible System Numbering
11-11-58 Service Code Setup (for Setup/
Entry Operation) – Call Forward
with Personal Greeting
Set the service code for setting
call forwarding with Personal
Greeting.
MLT, SLT
(default = 795)
11-12-01 Service Code Setup (for Service
Access) – Bypass Call
Set the service code for Activating
Call Forwarding/Do Not Disturb
Override. This code is available
only if you disable the voice mail
Single Digit dialing code in
Program 11-16-09.
MLT, SLT
(default = 807)
11-12-02 Service Code Setup (for Service
Access) – Conference
Use to customize the conference
Service Codes used for service
access.
MLT, SLT
(default = 826)
11-12-03 Service Code Setup (for Service
Access) – Override (Off-Hook
Signaling)
Use to customize the override
(off-hook signaling) used for
service access.
MLT, SLT
(default = 809)
11-12-04 Service Code Setup (for Service
Access) – Set Camp-On
Customize the Service Code,
which is to be used for setting
Camp-On.
MLT, SLT
(default = 850)
11-12-05 Service Code Setup (for Service
Access) – Cancel Camp-On
Customize the Service Code,
which is to be used for cancelling
Camp-On.
MLT, SLT
(default = 870)
11-12-06 Service Code Setup (for Service
Access) – Switching of Voice
Call and Signal Call
Use to customize the switching of
voice call and signal call used for
service access.
MLT, SLT
(default = 812)
11-12-07 Service Code Setup (for Service
Access) – Step Call
Use to customize the step call
used for service access.
MLT, SLT
(default = 808)
11-12-08 Service Code Setup (for Service
Access) – Barge-In
Determine what the service code
should be for an internal party to
use the Barge-In feature.
MLT, SLT
(default = 810)
11-12-09 Service Code Setup (for Service
Access) – Change to STG
(Department Group) All Ring
Use this option to set the service
code for ringing all members of a
Department Group.
MLT, SLT
(default = 780)
11-12-10 Service Code Setup (for Service
Access) – Station Speed Dialing
Assign Service code for accessing
System Speed Dial bins.
MLT, SLT
(default = 813)
11-12-11 Service Code Setup (for Service
Access) – Group Speed Dialing
Use to customize the group speed
dialing Service Codes used for
service access.
MLT, SLT
(default = 814)
11-12-12 Service Code Setup (for Service
Access) – Last Number Dial
Assign a service code to use Last
Number Dial.
MLT, SLT
(default = 816)
11-12-13 Service Code Setup (for Service
Access) – Saved Number Dial
Customize the service code to be
used for dialing a saved number.
MLT, SLT
(default = 815)
11-12-14 Service Code Setup (for Service
Access) – Trunk Group Access
Use to customize the Service
Codes which are used for service
access.
MLT, SLT
(default = 804)
Program
Number
Program Name Description/Comments Assigned Data