NEC Univerge SV8100 - Page 523

UNIVERGE SV8100 Issue 5.0
Flexible System Numbering 1 - 513
11-12-15 Service Code Setup (for Service
Access) – Specified Trunk
Access
Use to customize the Service
Codes which are used for
specified trunk access.
MLT, SLT
(default = 805)
11-12-16 Service Code Setup (for Service
Access) – Trunk Access Via
Networking
Use to customize the Service
Codes which are used for trunk
access via networking.
MLT, SLT
(default = 866)
11-12-17 Service Code Setup (for Service
Access) – Clear Last Number
Dialing Data
Assign a service code to clear the
Last Number Dial.
MLT, SLT
(default = 876)
11-12-18 Service Code Setup (for Service
Access) – Clear Saved Number
Dialing Data
Define the service code for Clear
Save Number Dialing List if it is
not acceptable.
MLT, SLT
(default = 885)
11-12-19 Service Code Setup (for Service
Access) – Internal Group Paging
Define the service code for
accessing an internal paging
group.
MLT, SLT
(default = 801)
11-12-20 Service Code Setup (for Service
Access) – External Paging
External paging access code.
Service code setup.
MLT, SLT
(default = 803)
11-12-21 Service Code Setup (for Service
Access) – Meet-Me Answer to
Specified Internal Paging Group
Use to customize the Service
Codes used for meet-me answer
to specified internal paging group
service access.
MLT, SLT
(default = 864)
11-12-22 Service Code Setup (for Service
Access) – Meet-Me Answer to
External Paging
Use to customize the Service
Codes used for meet-me answer
to external paging service access.
MLT, SLT
(default = 865)
11-12-23 Service Code Setup (for Service
Access) – Meet-Me Answer in
Same Paging Group
Use to customize the Service
Codes used for meet-me answer
in same paging group service
access.
MLT, SLT
(default = 863)
11-12-24 Service Code Setup (for Service
Access) – Combined Paging
Combined paging, internal/
external access code. Service
code setup.
MLT, SLT
(default = 751)
11-12-25 Service Code Setup (for Service
Access) – Direct Call Pickup -
Own Group
Use to customize the Service
Codes for direct call pickup – own
group which are used for service
access.
MLT, SLT
(default = 856)
11-12-26 Service Code Setup (for Service
Access) – Call Pickup for
Specified Group
Use to customize the Service
Codes for call pickup for specified
group which are used for service
access.
MLT, SLT
(default = 868)
11-12-27 Service Code Setup (for Service
Access) – Call Pickup
Use to customize the Service
Codes for call pickup which are
used for service access.
MLT, SLT
(default = 867)
Program
Number
Program Name Description/Comments Assigned Data