NEC Univerge SV8100 - Page 524

Issue 5.0 UNIVERGE SV8100
1 - 514 Flexible System Numbering
11-12-28 Service Code Setup (for Service
Access) – Call Pickup for
Another Group
Use to customize the Service
Codes for call pickup for another
group which are used for service
access.
MLT, SLT
(default = 869)
11-12-29 Service Code Setup (for Service
Access) – Direct Extension Call
Pickup
Use to customize the Service
Codes for direct extension call
pickup which are used for service
access.
MLT, SLT
(default = 715)
11-12-30 Service Code Setup (for Service
Access) – Specified Trunk
Answer
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
MLT, SLT
(default = 772)
11-12-31 Service Code Setup (for Service
Access) – Park Hold
Set the service code which should
be used for placing a call in Park.
MLT, SLT
(default: 831)
11-12-32 Service Code Setup (for Service
Access) – Answer for Park Hold
Set the service code which should
be used for answering a call in
Park.
MLT, SLT
(default: 861)
11-12-33 Service Code Setup (for Service
Access) – Group Hold
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
MLT, SLT
(default = 832)
11-12-34 Service Code Setup (for Service
Access) – Answer for Group
Hold
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
MLT, SLT
(default = 862)
11-12-35 Service Code Setup (for Service
Access) – Station Park Hold
Set the service code to be used for
placing a call in a Personal Park.
MLT, SLT
(default = 773)
11-12-36 Service Code Setup (for Service
Access) – Door Box Access
If the service code for Doorphone
Access is not acceptable, change
it here.
MLT, SLT
(default = 802)
11-12-37 Service Code Setup (for Service
Access) – Common Canceling
Service Code
Use to customize the Service
Codes used for common canceling
service code access.
MLT, SLT
(default = 720)
11-12-38 Service Code Setup (for Service
Access) – General Purpose
Indication
Use to customize the Service
Codes used for general purpose
indication access.
MLT
(default = 883)
11-12-39 Service Code Setup (for Service
Access) – Voice Mail Center
Access
Use to customize the Service
Code for Voice Mail Center
Access.
(default not assigned)
11-12-40 Service Code Setup (for Service
Access) – Station Speed Dialing
Use to customize the station
speed access Service Codes.
MLT, SLT
(default = 761)
11-12-41 Service Code Setup (for Service
Access) – Voice Over
The service code used for the
Voice Over feature.
MLT
(default = 890)
Program
Number
Program Name Description/Comments Assigned Data