NEC Univerge SV8100 - Page 525

UNIVERGE SV8100 Issue 5.0
Flexible System Numbering 1 - 515
11-12-42 Service Code Setup (for Service
Access) – Flash on Trunk lines
Use to customize the Service
Codes which are used for flash on
trunk lines.
SLT
(default = 806)
11-12-43 Service Code Setup (for Service
Access) – Answer No-Ring Line
(Universal Answer)
Customize the service code to be
used to manually answer a
Universal Night Answer.
MLT, SLT
(default = 872)
11-12-44 Service Code Setup (for Service
Access) – Callback Test for SLT
If required, redefine the service
code used for SLT Callback Test.
SLT
(default = 899)
11-12-45 Service Code Setup (for Service
Access) – Enabled On Hook
When Holding (SLT)
Use to customize the Service
Codes which are used for the
enabled on hook when holding
(SLT).
SLT
(default = 849)
11-12-46 Service Code Setup (for Service
Access) – Answer On Hook
When Holding (SLT)
Use to customize the Service
Codes which are used for the
answer on hook when holding
(SLT).
SLT
(default = 859)
11-12-47 Service Code Setup (for Service
Access) – Call Waiting Answer/
Split Answer
If required, use this program to
change the code users dial to Split
while on a call.
SLT
(default = 894)
11-12-48 Service Code Setup (for Service
Access) – Account Code
Use to customize the Service
Codes which are used for the
account code.
SLT
(default = 891)
11-12-50 Service Code Setup (for Service
Access) – General Purpose
Relay
Define the service code to be used
for turning the general purpose
relay on and off.
MLT, SLT
(default = 880)
11-12-51 Service Code Setup (for Service
Access) – VM Access (InMail and
VMS)
Use to customize the Service
Codes which are used for the VM
access (InMail and VMS).
MLT, SLT
(default = 717)
11-12-52 Service Code Setup (for Service
Access) – Live Monitoring
(InMail)
Define access code used for
InMail Live Monitoring (VRS). At
default this program is not set.
MLT
(default = 725)
11-12-53 Service Code Setup (for Service
Access) – Live Recording at SLT
Use to customize the Service
Codes which are used for live
recording at SLT.
MLT, SLT
(default = 754)
11-12-54 Service Code Setup (for Service
Access) – VRS Routing for ANI/
DNIS
Define the service code to use
when setting up ANI/DNIS Routing
to the VRS Automated Attendant.
Using the Transfer feature, this
also allows a call to be transferred
to the VRS.
(default = 882)
11-12-56 Service Code Setup (for Service
Access) – E911 Alarm Shut Off
Select the Service Code that an
extension user can dial to shut off
the E911 Alarm Ring.
MLT
(default not assigned)
Program
Number
Program Name Description/Comments Assigned Data