NEC Univerge SV8100 - Page 530

Issue 5.0 UNIVERGE SV8100
1 - 520 Flexible System Numbering
Operation
None
11-16-06 Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
Customize the 1-digit Service
Code used for DND/Call Forward
Override.
(default not assigned)
11-16-07 Single Digit Service Code Setup
– Message Waiting
Use to customize the message
waiting Service Codes used when
a busy or ring back signal is heard.
(default not assigned)
11-16-08 Single Digit Service Code Setup
– Voice Over
Service code used for the Voice
Over feature.
(default not assigned)
11-16-09 Single Digit Service Code Setup
– Access to Voice Mail
Use to customize the access to
voice mail Service Codes used
when a busy or ring back signal is
heard.
(default not assigned)
11-16-10 Single Digit Service Code Setup
– (Department) STG All Ring
Mode
Assign the Single Digit
(post-dialing) Service Code for All
Member Ring.
(default not assigned)
11-16-11 Single Digit Service Code Setup
– Station Park Hold
Customize the one-digit service
code to be used when placing a
call in Personal Park.
(default not assigned)
11-20-01 Dial Extension Analyze Table –
Dial Digits
Use tables 01 ~ 128 to assign the
digits to be dialed using the Dial
Extension Analyze Tables. These
tables are used when Program
11-01-01 is set to option 9 = Dial
Extension Analyze. Up to eight
digits can be assigned
Dial (Up to eight digits:
0, 1~9,
#, *, @)
11-20-02 Dial Extension Analyze Table –
Type of Dials
Assign the Type of Dial for the
Extension Analyze Table from
Program 11-20-01.
Type of Dials:
0 = Not used
1 = Service Code
2 = Extension Number
5 = Operator Access
6 = F-Route Access
(default not assigned)
Program
Number
Program Name Description/Comments Assigned Data