NEC Univerge SV8100 - Page 537

UNIVERGE SV8100 Issue 5.0
Flexible Timeouts 1 - 527
20-31-16 Timer Class Timer Assignment –
Transfer Recall Time
An unanswered transferred call
recalls after this time to the
extension that initially transferred
it.
0~64800 (seconds)
(default = 30 seconds)
20-31-17 Timer Class Timer Assignment –
DID/DISA No Answer Time
(Disconnect or IRG or VM)
A VRS/DISA caller can ring an
extension for this time before the
system sets the call as a Ring No
Answer. After this time expires, the
call follows the programmed Ring
No Answer routing (set in Program
25-03 and 25-04).
0~64800 (seconds)
(default = 0 seconds)
20-31-18 Timer Class Timer Assignment –
Disconnect after Re-transfer to
IRG
Use to assign Disconnect after Re-
transfer to IRG time.
0~64800 (seconds)
(default = 60 seconds)
20-31-19 Timer Class Timer Assignment –
Long Conversation Warning
Tone Time (Trunk to Trunk)
Determine the time a DISA caller
or any trunk-to-trunk (such as
Tandem Trunking) conversation
can last before the Long
Conversation tone is heard.
0~64800 (seconds)
(default = 180
seconds)
20-31-20 Timer Class Timer Assignment –
Long Conversation Disconnect
(Trunk to Trunk)
This time determines how long the
system waits before disconnecting
a DISA caller or any trunk-to-trunk
(such as Tandem Trunking)
conversation call after the Long
Conversation tone is heard.
0~64800 (seconds)
(default = 10 seconds)
20-31-21 Timer Class Timer Assignment –
DISA Internal Paging Time
This is the maximum length of an
Internal Page placed by a DISA
caller. If the Page continues longer
than this time, the system
terminates the DISA call.
0~64800 (seconds)
(default = 30 seconds)
20-31-22 Timer Class Timer Assignment –
DISA External Paging Time
This is the maximum length of an
External Page placed by a DISA
caller. If the Page continues longer
than this time, the system
terminates the DISA call.
0~64800 (seconds)
(default = 30 seconds)
20-31-23 Timer Class Timer Assignment –
Page Announcement Duration
This timer sets the maximum
length of Page announcements.
(Affects External Paging only).
0~64800 (seconds)
(default = 1200
seconds)
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit Time
Set the time-out interval for DID
callers that do not dial. After this
interval, the DID call routes
according to Vacant Number
Intercept programming.
0~64800 (seconds)
(default = 10 seconds)
Program
Number
Program Name Description/Comments Assigned Data