NEC Univerge SV8100 - Page 536

Issue 5.0 UNIVERGE SV8100
1 - 526 Flexible Timeouts
20-31-07 Timer Class Timer Assignment –
Ring No Answer Alarm Time
If a trunk rings a multiline
telephone longer than this interval,
the system changes the ring
cadence. This indicates to the
user that the call has been ringing
too long.
0~64800 (seconds)
(default = 60 seconds)
20-31-08 Timer Class Timer Assignment –
DIL/Incoming Ring Group No
Answer Time
Longer than this interval diverts to
the DIL No Answer Ring Group
(set in Program 22-08).
0~64800 (seconds)
(default = 0 seconds)
20-31-09 Timer Class Timer Assignment –
DID Ring-No-Answer Time
In systems with DID
Ring-No-Answer Intercept, this
interval sets the Ring-No-Answer
time. This interval is how long a
DID call rings the destination
extension before rerouting to the
intercept ring group.
0~64800 (seconds)
(default = 20 seconds)
20-31-10 Timer Class Timer Assignment –
Hold Recall Time (Non Exclusive
Hold)
A call on Hold recalls the
extension that placed it on Hold
after this time. This time works
with the Hold Recall Callback Time
(Program 24-01- 02).
0~64800 (seconds)
(default = 90 seconds)
20-31-11 Timer Class Timer Assignment –
Hold Recall CallBack Time (Non
Exclusive Hold)
A trunk recalling from Hold or Park
rings an extension for this time.
This time works with Hold Recall
Time or Park Hold Time. After this
time, the system invokes the Hold
Recall Time again. Cycling
between time Program 24-01-01
and 24-01-02 and Program
24-01-06 and 24- 01-07 continues
until a user answers the call.
0~64800 (seconds)
(default = 30 seconds)
20-31-12 Timer Class Timer Assignment –
Exclusive Hold Recall Time
A call left on Exclusive Hold recalls
the extension that placed it on
Hold after this time.
0~64800 (seconds)
(default = 90 seconds)
20-31-13 Timer Class Timer Assignment –
Exclusive Hold Recall Callback
Time
An Exclusive Hold Recall rings an
extension for this time. If not
picked up, the call goes back on
System Hold.
0~64800 (seconds)
(default = 30 seconds)
20-31-14 Timer Class Timer Assignment –
Park Hold Time – Normal
Use to assign the Park Hold time
on a class of service basis.
0~64800 (seconds)
(default = 90 seconds)
20-31-15 Timer Class Timer Assignment –
Delayed Call Forwarding Time
(Call Forward No Answer)
If activated at an extension,
Delayed Call Forwarding occurs
after this time. This also sets how
long a Transferred call waits at an
extension forwarded to Voice Mail
before routing to the called
extension mailbox.
0~64800 (seconds)
(default = 10 seconds)
Program
Number
Program Name Description/Comments Assigned Data