Issue 5.0 UNIVERGE SV8100
1 - 564 Headset Operation
Operation
To enable the headset:
1. Plug in the headset into the headset jack on the bottom of the telephone.
2. Program a Headset key (Program 15-07 or SC 851: 05).
. You hear a confirmation beep.
20-09-07
Class of Service Options
(Incoming Call Service) – Call
Queuing
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-06
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension to
manually (0) or automatically (1)
receive off-hook signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
