NEC Univerge SV8100 - Page 580

Issue 5.0 UNIVERGE SV8100
1 - 570 Hold
15-02-06 Multiline Telephone Basic Data
Setup – Hold Key Operating
Mode
Use this option to set the function
of the Multiline Hold key. The Hold
key can activate normal Hold or
Exclusive Hold.
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)
15-02-07 Multiline Telephone Basic Data
Setup – Automatic Hold for CO
Lines
Determines whether an extension
will disconnect the trunk line (1) or
automatically hold it (0) when you
direct select a CO line without
placing the call on hold first.
Automatic Hold does not work until
the elapse call timer is displayed.
0 = Hold
1 = Disconnect (Cut)
(default = 1)
15-02-11 Multiline Telephone Basic Data
Setup – Callback Automatic
Answer
Enable (1) or disable (0) Callback
Automatic Answer.
0 = Off
1 = On
(default = 1)
15-06-01 Trunk Access Map for
Extensions
Assign Trunk Access Maps to
extensions.
Trunks 1~200
(default = 1)
15-07-01
Programmable Function Keys
Assign a function key for Exclusive
Hold (code 45). If an extension
has its fixed Hold key reassigned
(in Program 15-02-06), assign a
function key for System Hold
(code 44).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
16-02-01 Department Group Assignment
for Extensions
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Department Groups
1-64
Priority 1-512
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension
ports = Class 1
20-11-09 Class of Service Options (Hold/
Transfer Service) – Group Hold
Initiate
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to initiate Group
Hold (Service Code 732).
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data