NEC Univerge SV8100 - Page 601

UNIVERGE SV8100 Issue 5.0
Hotel/Motel 1 - 591
Refer to the On Line UNIVERGE SV8100 Hotel/Motel Services Manual for complete programming
information.
Operation
Refer to the On Line UNIVERGE SV8100 Hotel/Motel Services Manual for complete operation
information.
42-05-03 Hotel Room Status Printer –
Wake Up Call No Answer Data
Set the LAN port to output the
Hotel Data (Check-Out sheet,
Room Status, etc.) and the wake
up call no answer data options for
the Hotel/ Motel feature.
0 = Not Output
1 = Output
(default = 0)
42-05-04 Hotel Room Status Printer –
Check-Out Sheet
Set the LAN port to output the
Hotel Data (Check-Out sheet,
Room Status, etc.) and the
check-out sheet options for the
Hotel/ Motel feature.
0 = Not Output
1 = Output
(default = 0)
42-06-01 PMS Service Setting – PMS Port
Number
Set the PMS port number when
using the PMS feature.
0~65535
(default = 5129)
42-06-02 PMS Service Setting – 3:00 AM
Auto Room Scan
Set maid required status for all
checked-in rooms at 3:00 AM.
0 = Off
1 = On
(default = 0)
42-06-03 PMS Service Setting – CheckIn
Message Type
Set the check-in message type
when using the PMS feature.
0 = Off
1 = On
(default = 0)
42-06-04 PMS Service Setting – CheckOut
Auto Status Change
Set the checkout auto status
change when using the PMS
feature.
0 = Off
1 = On
(default = 0)
42-06-05 PMS Service Setting –
AREYUTHERE/LINETEST Send
Timing
Set the AREYUTHERE/LINETEST
send timing when using the PMS
feature.
1~128 (seconds)
(default = 10)
42-06-06 PMS Service Setting –
AREYUTHERE/LINETEST Send
Count
Set the AREYUTHERE/LINETEST
send count when using the PMS
feature.
0~20 (times)
(default = 3)
42-07-01 PMS Restriction Level
Conversion Table
Change the default Toll Restriction
class on check in for a room
(Program 42-02-02).
1~15
Default:
Level 0 = 10
Level 1 = 11
Level 2 = 12
Level 3 = 13
Program
Number
Program Name Description/Comments Assigned Data