NEC Univerge SV8100 - Page 600

Issue 5.0 UNIVERGE SV8100
1 - 590 Hotel/Motel
42-03-05 Class of Service Options (Hotel/
Motel) – Wake up Call Setting for
Other Extension
Set the Hotel/Motel wake up call
setting for other extension COS
options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-06 Class of Service Options (Hotel/
Motel) – Room Status Change for
Other Extension
Set the Hotel/Motel room status
change for other extension COS
options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-07 Class of Service Options (Hotel/
Motel) – Restriction Class
Changing for Other Extension
Set the Hotel/Motel restriction
class changing for other extension
COS options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-08 Class of Service Options (Hotel/
Motel) – Room to Room Call
Restriction
Set the Hotel/Motel room to room
call restriction COS options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-09 Class of Service Options (Hotel/
Motel) – DND Setting for Own
Extension
Set the Hotel/Motel DND setting
for own extension COS options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-10 Class of Service Options (Hotel/
Motel) – Wake Up Call Setting for
Own Extension
Set the Hotel/Motel wake up call
setting for own extension COS
options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-11 Class of Service Options (Hotel/
Motel) – Change Room Status for
Own Extension
Set the Hotel/Motel change room
status for own extension COS
options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-12 Class of Service Options (Hotel/
Motel) – SLT Room Monitor
Enable/Disable a single line
telephone ability to use Room
Monitor.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-04-01 Hotel Mode One-Digit Service
Codes
Set up the Hotel Mode one-digit
service codes assigned in
Program 42-02-01.
1~64 (Calling Group)
Up to eight digits
1~9, 0,
*, #
(default not assigned)
42-05-01 Hotel Room Status Printer –
Output Port Type
Set the LAN port to output the
Hotel Data (Check-Out sheet,
Room Status, etc.) and the output
port type options for the Hotel/
Motel feature.
0 = No Setting
1 = CTA
3 = LAN
(default = 0)
42-05-02 Hotel Room Status Printer –
Output Destination Number
Set the LAN port to output the
Hotel Data (Check-Out sheet,
Room Status, etc.) and the output
destination number options for the
Hotel/ Motel feature.
Up to eight digits
(Extension number
which CTA/CTU is
equipped)
(default not assigned)
Program
Number
Program Name Description/Comments Assigned Data