NEC Univerge SV8100 - Page 599

UNIVERGE SV8100 Issue 5.0
Hotel/Motel 1 - 589
42-01-03 System Options for Hotel/Motel –
Wake Up Call No Answer
Assign the wake up call no answer
options for Hotel/Motel Service.
0 = No Transfer
1 = Transfer to the
Operator
(default = 0)
42-01-04 System Options for Hotel/Motel –
Setup Message Mode for Wake
Up Call (Hotel Mode)
Assign the setup message mode
for wake up call (hotel mode)
options for Hotel/Motel Service.
0 = Fixed Message
1 = VRS Message
2 = Time Information
and VRS
(default = 0)
42-01-05 System Options for Hotel/Motel –
Wake Up Call Message
Assignment
Assign the wake up call message
assignment options for Hotel/
Motel Service.
0~100
(0 = No Setting)
(default = 0)
42-02-01 Hotel/Motel Telephone Setup –
Hotel Mode
If you want an extension to
operate in the Hotel/Motel mode,
enter 1. If you want the telephone
to operate in the business mode,
enter 0.
0 = Normal
1 = Hotel
(default = 0)
42-02-02 Hotel/Motel Telephone Setup –
Toll Restriction Class When
Check In
Assign an extension Toll
Restriction Class when it is
checked in. The system has 15
Toll Restriction Classes (1~15).
The entry you make in this option
affects the telephone in all Night
Service modes. (Refer to
Programs 21-05 and 21-06 to set
up the Toll Restriction dialing
options.) When the extension is
checked out, it uses the Toll
Restriction Class set in Program
21-04.
1~15
(default = 1)
42-03-01 Class of Service Options (Hotel/
Motel) – Check-In Operation
Set the Hotel/Motel check-in
operation COS options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-02 Class of Service Options (Hotel/
Motel) – Check-Out Operation
Set the Hotel/Motel check-out
operation COS options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-03 Class of Service Options (Hotel/
Motel) – Room Status Output
Set the Hotel/Motel room status
output COS options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
42-03-04 Class of Service Options (Hotel/
Motel) – DND Setting for Other
Extension
Set the Hotel/Motel DND setting
for other extension COS options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data