NEC Univerge SV8100 - Page 598

Issue 5.0 UNIVERGE SV8100
1 - 588 Hotel/Motel
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
Turn Off or On the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display
at the called extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-40 Class of Service Options
(Supplementary Service) – Do
Not Disturb
Turn Off or On an extension user
ability to set or cancel Do Not
Disturb.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-17-01 Operator Extension – Operator’s
Extension Number
Define the extension numbers
used by operators.
Up to eight digits
(default = 101)
20-35-01 Extension’s Operator Setting Assign an extension to an
operator group.
0~15
(default = 0)
30-01-01 DSS Console Operating Mode Set the mode of the system DSS
Consoles. This option applies to
all system DSS Consoles.
0 = Business Mode
1 = Hotel Mode
2 = ACD Monitor Mode
3 = Business/ACD
Mode
(default = 0)
30-02-01 DSS Console Extension
Assignment – Extension Number
Define the extension number for
the multiline terminal connected
with the DSS console (up to eight
digits).
Up to eight digits.
(default not assigned)
30-03-01 DSS Console Key Assignment Customize DSS Console keys to
function as DSS keys, Service
Code keys, Programmable
Function Keys, and One-Touch
Calling keys. The key [when
defined as a DSS/One-Touch key
(code 01)] can have any function
up to four digits (e.g., extension
number or Service Code). The
function information (such as
extension number or Service
Code) would then be entered as
the additional data.
Key Number
001~500
0~99 (General
Functional Level)
97 = Door Box Access
key (additional data:
1~8 Door Box No.)
* 00 ~ * 99
(Appearance
Functional Level)
42-01-01 System Options for Hotel/Motel –
Answering Message Mode for
Wake Up Call (Hotel Mode)
Assign the answering message
mode for wake up call options for
Hotel/Motel Service.
0 = MOH (Hold Time)
1 = VRS Message
2 = VRS Message +
Time
(default = 0)
42-01-02 System Options for Hotel/Motel –
Wake Up Call Message
Assignment
VRS Message for Wake Up Calls.
You must make an entry for this
program if you have selected 1 or
2 in Item 1 above.
0~100
(0 = No Setting)
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data