NEC Univerge SV8100 - Page 635

UNIVERGE SV8100 Issue 5.0
ISDN Compatibility 1 - 625
Operation
None
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
Turns Off (0) or On (1) the Caller
ID display at an extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
Define whether an extension
displays the Caller Sub-Address, 0
= Deny, 1 = Allow.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-11 Class of Service Options (Hold/
Transfer Service) – Auto On-
Hook Transfer
In an extensions Class of Service,
turn Off (0) or On (1) an extension
ability to transfer when the user
hangs up.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-14 Class of Service Options (Hold/
Transfer Service) – Trunk-to-
Trunk Transfer Restriction
Turns Off (0) or On (1) the
Trunk-to-Trunk Transfer
Restriction. If enabled,
Trunk-to-Trunk Transfer is not
possible.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
Allow (0) an extension user’s
ability to set up a tandem call
automatically when they hang up.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
Select whether an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-19-04 System Options for Caller ID –
Wait Facility IE Timer
This is the time an ISDN trunks
uses to determine how long the
system waits for the Caller ID
name from the Telco.
0~64800 seconds
(default = 10)
20-25-14 ISDN Options – No response
Release Send
Operation mode setting for when
second T303 timer expires.
0 = Off
1 = On
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data