NEC Univerge SV8100 - Page 644

Issue 5.0 UNIVERGE SV8100
1 - 634 Last Number Redial
Related Features
Automatic Route Selection
Repeat Redial
Save Number Dialed
Guide to Feature Programming
Operation
To redial your last call:
1. Without lifting the handset, press Redial.
. The last dialed number is displayed.
2. To redial the last number, press #.
- OR -
Search for the desired number from the Redial List by pressing Redial or VOLUME up or VOLUME
down keys.
3. Lift the handset or press Speaker to place the call.
Program
Number
Program Name Description/Comments Assigned Data
11-12-12 Service Code Setup (for Service
Access) – Last Number Dial
Assign a service code (816) to use
Last Number Dial.
MLT, SLT
(default = 816)
11-12-17 Service Code Setup (for Service
Access) – Clear Last Number
Dialing Data
Assign a service code (876) to
clear the Last Number Dial.
MLT, SLT
(default = 876)
15-02-13 Multiline Telephone Basic Data
Setup – Redial List Mode
Select the type of numbers that
are stored in the Redial List –
Internal and External numbers (0)
or External only (1).
0 = ICM/Trunk
(Extension/Trunk
Mode)
1 = Trunk Mode
(default = 1)
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
Turns Off (0) or On (1) an
extension ability to use Dial
Number Preview. This program
also turns Off or On the Last
Number Redial function.
0 = Off
1 = On
(default = 1 for
COS 1~15)