NEC Univerge SV8100 - Page 645

UNIVERGE SV8100 Issue 5.0
Last Number Redial 1 - 635
. The system automatically selects a trunk from the same group as your original call and dials the last number
dialed.
- OR -
1. At the multiline terminal, press Speaker or lift the handset (optional).
. The system automatically selects a trunk from the same group as your original call.
2. Press Redial.
- OR -
At the single line telephone, lift the handset.
3. Dial 816.
. The system automatically selects a trunk from the same group as your original call and dials the last number
dialed.
To check the number saved for Last Number Redial:
1. Press Redial.
. The stored number displays for six seconds. The stored number dials out if you:
- Lift the handset,
- Press an idle line key,
- or -
- Press Speaker.
2. Press the Exit key.
To erase the stored number:
1. At the multiline terminal, press Speaker or lift handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 876.