NEC Univerge SV8100 - Page 650

Issue 5.0 UNIVERGE SV8100
1 - 640 Line Preference
14-07-01 Trunk Access Map Setup For Outgoing Line Preference and
Auto-Answer of Non-Ringing
Lines, set up the Trunk Access
Maps.
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
15-01-02 Basic Extension Data Setup –
Outgoing Trunk Line Preference
Turn On (1) or Off (0) Outgoing
Trunk Line Preference for
extensions.
0 = Off
1 = On
(default = 0)
15-02-10 Multiline Telephone Basic Data
Setup – Ringing Line Preference
for Trunk Calls
Enable Idle (0) or Ringing (1) Line
Preference for trunk calls.
Program 22-01-01 sets Intercom
(0) or trunk (1) call priority.
0 = Idle
1 = Ringing
(default = 1)
15-06-01 Trunk Access Map for
Extensions
For Outgoing Line Preference and
Auto-Answer of Non-Ringing
Lines, assign trunk Access Maps
to extensions.
Trunk Access Maps:
1~200
(default = 1)
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
Turns Off (0) or On (1) an
extension to use Universal Auto
Answer (no service code
required).
0 = Off
1 = On
(default = 0 for
COS 1~15)
22-01-01 System Options for Incoming
Calls – Incoming Call Priority
Use this option to determine if
Intercom calls or trunk calls have
answer priority when both are
ringing simultaneously.
0 = Intercom call
priority
1 = Trunk call priority
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data